Home
Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
Monitoring & Controlling
The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
Control Cockpit
Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
Network Settings
The following network settings are available for the TC Bar.
Activating tagged VLAN (Dante® network)
A VLAN (virtual local area network) separates a physical network into partial networks. As a result, you can set up several virtual networks from a physically existent switch port (such as the Dante® network and control software network).

Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
- Quick start
  The TC Bar can be connected in just a few steps and used immediately.
- Product Overview
- Mounting
- Start-up the product
  This chapter describes the initial configuration and commissioning of the TC Bar.
- Usage
  The following chapters contain additional information on operating the TC Bar.
- Monitoring & Controlling
  The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
  - Local Web UI (LUI)
    LUI provides a user-friendly platform for interacting with system functionalities and features.
  - DeviceHub
    DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
  - Control Cockpit
    Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
    - Initial configuration
      This section guides you step by step through the initial configuration using tried-and-trusted methods and procedures.
    - Audio Settings
      The following settings can be adjusted in the audio tab.
    - Zones
      The TeamConnect Bar allows you to define two different types of zones.
    - Device Settings
      The following device settings are available for the TC Bar.
    - Network Settings
      The following network settings are available for the TC Bar.
      - Activating tagged VLAN (Dante® network)
        A VLAN (virtual local area network) separates a physical network into partial networks. As a result, you can set up several virtual networks from a physically existent switch port (such as the Dante® network and control software network).
      - Activating Bluetooth®
        When the device is delivered, Bluetooth® is deactivated and can be activated in the Control Cockpit.
      - Starting Bluetooth® pairing
        The pairing process can be started using the Bluetooth® button.
      - Activating Dante® signal forwarding
        Using the Dante controller software, you can activate a digital audio network protocol via Ethernet for the routing and a synchronization of Dante®-compatible devices.
      - Activating the continuous Dante® stream
        This function enables the continuous transmission of microphone streams over Dante®.
      - Selecting a network mode
        You can configure the various network modes using the panel in Sennheiser`s control software.
    - Camera Settings
    - Access
      Here you can manage third-party access and device access.
- Product care
  Fundamental care and maintenance practices to help ensure the longevity and proper functioning of the device.

Activating tagged VLAN (Dante® network)

A VLAN (virtual local area network) separates a physical network into partial networks. As a result, you can set up several virtual networks from a physically existent switch port (such as the Dante® network and control software network).

The TC Bar supports the prioritizing technology tagged VLAN as per IEEE 802.1Q. Thus, for example, when the TC Bar S is used with only a network connection, the Dante® network and the control software network can be separated virtually and operated independently. In the process, the frames for the Dante® network receive a tag (marking) that contains the VLAN ID. That is how the switch port receives information about the Dante® VLAN to which the frame belongs.

Note:

When the TC Bar M is used, the Dante® network and control software network can be operated independently of one another via the two existing network ports. To do this, select the network mode Split Mode. You can find more information in the chapter Split mode.

To activate tagged VLAN for a Dante® network:

In the Control Cockpit, navigate to Devices > TC Bar > Network.
In the Network Mode window, select the mode Dual Domain Mode.
The device will be rebooted.
In the Dante® Settings window, click Edit.
In the field VLAN ID, enter the correct ID in order to be routed to the correct network.
Click OK to save the changes.

Tagged VLAN has been activated.