Home
User manual
This manual provides detailed information about installation and usage of the individual products in the SpeechLine Digital Wireless series.
The CHG 2N charger
Controlling and monitoring the charger over the network
Integrating the charger into a network without DHCP using Fixed IP

Integrating the charger into a network without DHCP using Fixed IP

If there is no DHCP server in the network and you are working with fixed IP addresses, please observe the following information.

The charger is delivered with automatic IP assignment configured by default. After adding it in the Sennheiser Control Cockpit, you can reconfigure it to Fixed IP. To do so, proceed as described: Integrating the charger into a network without DHCP using Auto IP.

If you wish to do this, you must temporarily reconfigure the host PC on which the Sennheiser Control Cockpit is installed to automatic IP assignment.

If the CHG 2N charger is visible in the Sennheiser Control Cockpit, you can do the IP configuration manually:

Change the IP settings under Device Details -> Network in the Sennheiser Control Cockpit.