Integrating the charger into a network without DHCP using Auto IP
If there is no DHCP server in the network and you are working with automatically generated IP addresses, please observe the following information.
Ensure that the host PC on which the Sennheiser Control Cockpit service is
installed is configured so that the IP address is assigned automatically,
rather than a static configuration.
After several minutes, all chargers in the network will receive a
link-local address in the range of 169.254.x.x.
You can deactivate mDNS after you have configured the charger once.
mDNS = multicast Domain Name System: resolves host names to IP addresses within small
networks that do not include a local name server. Used for automatic device discovery.
Some basic routers with an integrated DHCP server require more time to start.
In this case, the SpeechLine devices may initially receive an automatically assigned IP.
Once a DHCP server is available, however, the IP addresses assigned by the server will be used.