Leveling out microphones

  1. Adjust the microphone sensitivity via the mixing console, the auto mixer or the digital signal processor (DSP) so that it neither is neither overdriven nor underdriven. For more information about the audio settings, see the instruction manual for respective device.
    If interference occurs in the microphone at high field strengths, remove the source of interference from the microphone.
Setting the “low-cut” filter on the MEB 114 (-S)
Tables and lecterns transmit sound if the speaker accidentally bumps into them, for example. The “low-cut” filter enables frequencies under 120 Hz to be filtered out and interference reduced.
  1. Slide the switch to the desired position.
    “Low-cut” filter deactivated
    “Low-cut” filter activated