Information on the bodypack transmitter’s display

Link name

• You can assign a name to the radio link in the transmitter’s menu (see Name menu item).
• Alternatively, you can assign the name in the receiver’s menu and then synchronize it to the transmitter (see Ch 1 / Ch 2 -> Name menu item).

Frequency

• You can manually set the frequency of the radio link in the transmitter’s menu (see Frequency menu item).
• The frequency of the radio link can also be set manually in the receiver’s menu (see Ch 1 / Ch 2 -> Frequency menu item) or via the Auto Setup function (see Ch 1 / Ch 2 -> Scan / Auto Setup menu item) and then synchronized to the transmitter.

Battery status

• Displays the charging status of the batteries or the BA 70 battery pack.
• When using the BA 70 rechargeable battery, the remaining runtime is also displayed in hours and minutes.
• The battery status is hidden in the display’s default state. Short-press the On/Off button on the transmitter (Check function, see Checking the battery status of the transmitter (Check function)) to display the battery status for approx. 5 seconds.
  
  

System icons

	The transmitter’s mute switch is deactivated. See Mute Button menu item.
	The Auto Lock function is activated. See Auto Lock menu item.
	AES 256 encryption is enabled. See System -> Link Encryption menu item.

Note that the transmitter’s permanent E-Ink display still displays the parameters after it is switched off.